The bathroom is one of the most frequently used areas of the home — but is that use starting to show in yours? If you notice damaged tiles and cracks in the bathtub or you have a bunch of hard to clean surfaces, it may be time to refinish or replace these items in your bathroom.
When homeowners think of bathroom upgrades, they may think that the process will be invasive and lengthy. It doesn’t have to be that way, though. Here are three services you might consider using or doing yourself if it’s time your bathroom got some TLC.
Over time, bathtubs can begin to develop cracks, chips, stains, and other damage. Those problems can become a breeding ground for germs and bacteria if they get trapped in these damaged surfaces. However, refinishing or reglazing a bathtub in your home can help it look like new. This process can prolong the tub’s life by at least 10 years and even make it easier to clean. It can also have significant cosmetic benefits and can even be used to paint over another color tub to bring your bathroom up to date.
There are several products used as bathtub refinishers sold in home improvement stores, so you can do it yourself if you feel confident. All it takes is sanding down the tub and painting it with a glaze and epoxy. If you’re not confident in DIYing it, however, a service with professional bathtub refinishers will send someone to your home to do the job for you.
Whether you refinish your bathtub or not, there’s another surface in the bathroom that can become damaged and dirty over time: the wall tiles. A shower surrounded by tile can be a difficult area to clean, and re-caulking can only do so much. Getting new tile installed or getting tile refinished by a professional service can give your bathroom a clean and modern look.
New Bathtub Installation
The people who owned your home previously loved that sea-foam green shade for the bathtub. You and your family, on the other hand, don’t. If you’re not up for refinishing, getting a new bathtub installed can give your bathroom new life, and it’s one way to change the look of the bathroom without having to give the whole room a makeover.
Even if you don’t have a bathtub that looks stuck in the 1970s, you can still swap out the old for the new. If you notice any cracks, warping, or other problems that can’t be fixed with refinishing and reglazing, it may be time to consider a new tub altogether.
Have more questions about tile and bathtub refinishers and installations? Be sure to speak with a professional about what you can do. You can also leave a comment below for more information.
For more than three decades, Atlanta has found bathtub refinishing to be the overall best option. Bathtub refinishing is the simplest way to bring new life to your bathtub without having to deal with the aggravation of replacement. Bathtub refinishing is quick and easy and with little hassle will allow you to enjoy a like-new tub.
In addition to bathtub refinishing, Atlanta has also discovered that ceramic tile refinishing will not only bring new life to your tile, it will also allow you to change the color. Tile refinishing will prevent you from having to embark on a lengthy project and will save money in the process.
Please browse our site and read our articles to understand the benefits of bathtub and tile refinishing. At Georgia Tub & Tile we will bring our years of refinishing experience to giving your bathroom a new first class look!
To contact us for further information or to make an appointment to have your tub and tile refinished:
When addressing a bathroom project, cost will inevitably determine the route one chooses as to whether to replace or refinish the bathtub. While the investment in bathtub refinishing may sound expensive compared to the cost of buying a new bathtub, one must always remember the labor involved. The actual work is what determines the cost far beyond materials. Just as the same is true that a twenty dollar part for your car may run you hundreds of dollars, such is the case in both bathtub refinishing and replacement.
A common phrase that bathtub refinishers hear from potential customers is, “I can buy a new tub for half that price.” Another one often stated is, “That sure is an expensive price to paint something.” What both of these expressions have in common is that these particular customers never take into consideration the amount of work involved and the time it takes to do so. Just as bathtub replacement requires a great amount of work in both removing the old bathtub and putting the bathtub in place, bathtub refinishing requires in-depth preparation to ensure the procedure is performed properly.
First let’s look at what is involved in bathtub replacement. Most scenarios consist of a large, heavy cast-iron bathtub set in place and surrounded by ceramic tile. Taking the tub out of it place can require many facets. It may be necessary to remove irreplaceable tile and hope it doesn’t get broken in the process. Oftentimes, these older bathtubs have to be demolished and broken into several pieces with a sledgehammer in order to take it out of the narrow doorway. Then the new bathtub has to be set and tile then replaced. Finally, there is the expense of disposing of the old refuse. When all is said and done a bathtub that is priced between $100 and $200 can cost $1,000 to $2,000 just to install. Then you must take into account that the newer bathtubs are not as sturdy as their ancestors; in several years you may be faced with the dilemma of whether to go through the hassle of replacement again or refinishing an inferior bathtub.
Now let’s examine bathtub refinishing. First understand that this process is not merely coating the existing porcelain with paint. The enamel is a highly durable acrylic urethane made to withstand standard bathtub use. It can be compared more to painting an automobile than to painting a wall in your home. Though there are certain restrictions on cleaners that one may use, a refinished bathtub can endure everyday bathing, hot water temperatures and normal cleaning. All of these can be considered abuse to the finest of bathtubs. And with this in mind, before a bathtub can be refinished all of the mistreatment and its remnants must be addressed. Bathtubs can collect years of soap scum, body oils and cleanser residue trapped beneath the pours of the surface. They can also be subject to deep pitting and staining as a result of the protective coating wearing away. Before the first coat of enamel can be applied, each bathtub has to be cleaned thoroughly. A hydrofluoric acid must then be used to not only etch the surface but to kill any residing bacteria.
There can also be unforeseen situations a bathtub refinisher must deal with, including a dripping faucet or a clogged drain which leaves standing water in the bathtub.
Only after the surface is completely clean, dry and free from debris, the bathtub must be masked off so that no other area beyond the bathtub is refinished.
Finally the enamel is sprayed on in several coats giving you a glossy new looking finish.
When all is said and done, with cost of materials and labor, one should expect to pay between $300 and $400. Comparatively speaking, one can refinish their bathtub five times before ever spending the money it would cost to replace their bathtub once.
All in all, bathtub refinishing makes the most sense in terms cost effectiveness. More over, refinishing your bathtub allows you to keep your original heavy-duty bathtub that is no longer available to be purchased in today’s market. And finally choosing to refinish your bathtub will ensure that you maintain the integrity of your bathroom. When it comes to a decision as to whether to replace or refinish a bathtub, the people of Atlanta choose bathtub refinishing hands down.
As the years pass a standard bathtub will take a lot of abuse. The original finish on a bathtub is subject to not only bathing but cleaning with harsh cleansers. The shine will inevitably wear away and you have a bathtub with a finish that will not clean. At this point, you have a decision: live with your dull and dingy bathtub or get a new one. A third option many are not aware of is bathtub refinishing.
In recent years, Atlanta has seen substantial growth and many older homes have been sold as a result. In updating these houses, the owners have found that bathtub refinishing is the wisest choice. Tearing out a bathtub is a very involved process. It can require the removal of discontinued tile in order to take the tub out. Sometimes the bathtub has to be demolished into pieces in order to get it through the door. Then a new substandard bathtub is put in its place with new tile that is mismatched with the original. At the end of this project, the cost of labor alone can range into the thousands and leave you without use of your bathroom for days. However, bathtub refinishing will allow you to retain your original bathtub while not disturbing the ceramic tile, costing more than ¾’s less replacement and allow you use within 24 hours.
For most homeowners who are aware of its benefits, bathtub refinishing is Atlanta’s preference to their bathtub dilemma. It saves time and money while maintaining the overall integrity of their entire bathroom. With careful consideration of all the choices, you will undoubtedly find that bathtub refinishing to be the answer you have been looking for.
If you live in a home from an earlier era, your bathroom undoubtedly has wainscoting ceramic tile in a unique, but oftentimes, dated color. In addition, the age of this tile and repeated use and abuse can sometimes cause wear or grout inconsistencies. In some cases, a good cleaning and replacing grout may be all that’s needed. However, even if your tile is not so far gone that you can refresh it, you still have to live with the color. When faced with this predicament many people choose to remodel their entire bathroom. Little do they know a very viable substitute is in fact tile refinishing.
In Atlanta, many home owners have chosen to modernize their homes and spend exorbitant amounts of money on renovation projects. Two of the most costly projects are typically the kitchen and the bathroom. Oftentimes a contemporary style master bath is desired and the expenditure is justified. There are two other occasions though where such a project is not desired or needed: one, in not wanting to go to the same expense for the second bath as the master; two, in not wishing to do anything other than changing the color. Here is where tile refinishing can be a favorable solution to remodeling.
Understand that any remodeling project brings with it price tag, even tile refinishing. Putting a fresh new surface over your existing tile can be 5 times less expensive, saving you thousands of dollars. This is due to the fact that re-tiling your bathroom first requires demolition, where tile refinishing does not. In addition, with tile refinishing you will also incur much less inconvenience. Tile removal and re-installation projects can span days or in some cases more than a week. This will not only leave you without the use of your bathroom but subject your home to the dust and debris of any other construction site. Tile refinishing projects can generally be completed the same day and will allow you the use of your bathroom again within 24 hours from the time the job is completed.
For decades, Atlanta has seen tile refinishing has been a practical alternative to complete renovation. With a savings of time, effort, convenience and money, concentration can be placed on other more important projects or matters. Whether you are simply looking to change the color of your out-of-date tile or give your bathroom a fresh clean look, tile refinishing should be strongly considered.
In metro Atlanta, areas such as Midtown, Buckhead, Morningside, the Virginia Highlands, Little Five Points, Inman Park and Decatur all have one thing in common: a vast selection of historic homes. Depending on who has owned these properties will determine whether you may experience the charm of the original architecture or find a more contemporary design. As these homes have aged, it is not uncommon to find renovations have been done at least once. However if you are fortunate enough to have purchased one in its old-world glory, then you have the power to choose the outcome of the remodel. Those with an appreciation for tradition choose restoration over renovation; this includes every component from the front porch to the bathroom. And in the event that you find your bath equipped with an old dull footed bathtub, this can be preserved as well. Using the method of bathtub refinishing will return the look of this antique fixture to its original era.
Before deciding whether bathing refinishing is the right choice, you must first consider the overall condition of the bathtub. Most footed bathtubs found in the bathroom will likely have only suffered from the elements of normal bathing and harsh cleansers. These are generally the best candidates as they are in place and ready to be refurbished with the rest of the house. There are cases though where these tubs have been removed; giving your home the feel you desire then requires obtaining an antique tub from somewhere else. Fortunately, antique bathtubs can be found in abundance if you know where to look. Atlanta has several flea markets, antique stores and shows where they can typically be located and at very reasonable prices. If you choose to purchase one however there are several things you should look for. Remember the bathtub refinishing process is only as good as the bathtub that is being refinished.
First, examine the exterior; if it appears that several layers of paint are flaking off and it’s extremely rusted underneath then take caution before buying. The outside is a cast iron finish, unlike its inside counterpart which is baked with porcelain. A good way to keep the cost down is to refresh the paint on the exterior yourself as it requires much more preparation than the interior. Second, determine stability of the bathtub; be sure it has the original feet and that they keep the bathtub secure. If it is missing the original feet, be certain the ones provided will fit and lock tightly in place. Third, inspect the interior thoroughly and completely; use not only your eyes but your hands as well. Sometimes extreme wear may not be visible and it requires feeling to verify its presence. Also look for chips in the porcelain or deep scratches. The less preparation work needing to be done to the inside the better, as with refinishing any antique you are subject to unfixable flaws. Finally, assess the bathtub as a whole; decide whether it meets the criteria for bathtub refinishing overall. Keep in mind that finding a perfect bathtub is improbable. Some of these antique bathtubs date back to the end of the 19th century and have been exposed to everything from weather to physical mistreatment. It may be that you have to deal with some minor imperfections in order to obtain a solid and sturdy bathtub that will suit your needs. Once you have found the perfect antique bathtub the refinishing process can begin.
As with any renovation project in Atlanta, restoring an old home can be an immense task. Oftentimes you may be lucky to even find reproductions of materials used to fabricate the original look and feel. When it comes to your antique bathtub, you can rest assured that bathtub refinishing provides a quality synthetic to replicate an appearance of yesterday.